Page 6 - 11
Applications
Explorer 107 Operation and Maintenance Manual
© GBC Pro - Tech December 1999
a) Once the last image has completely traveled
pass pull rollers, press
O F F
under
MOTOR SPEED.
1
2
3
4
5
6
7
8
9
10
M O T O R S P E E D
O N
O F F
R E V E R S E
b) Raise the main roller and pull roller.
CAUTION
Do not use an open blade to cut
the web near the rollers.
You can put cuts into the rollers!
c) With an enclosed blade, cut the web of film
from the upper and lower supply roll.
d) Replace the current roll of film with the new roll
roll of film.
e) Unroll eneough film to tack to the existing web
of film.
f) Using masking tape, attach film from the top roll
of film to the existing top web.
g) Using masking tape, attach film from the bottom
roll of film to the existing bottom web.
h) Install the feed table and lower the front safety
shield. Lock all safety latches into the
interlocks.
INFORMATION
The laminator will operate only when
all safety latches are in the fully
latched position.
i) Rotate the motor speed adjust counterclockwise
to 1.
M O T O R S P E E D
O N
O F F
R E V E R S E
1
2
3
4
5
6
7
8
9
10
