Page 5 - 27
Explorer 107 Operation and Maintenance Manual
Operations
© GBC Pro - Tech December 1999
INFORMATION
The laminator will operate only when
all safety latches are in the fully
latched position.
Removing the feed table
Caution should always be exercised
when using the laminator with
the safety shields raised.
You can be seriously HURT or INJURED!
W A R N I N G
a) Pull both safety latches on the front safety
shield towards the center of the laminator.
b) Raise the safety shield to its full up right
position.
c) Pull the two locator latches of the pressure
plate toward the center of the laminator.
Locator latches
d) Remove the pressure plate and set in a safe
place away from the laminator if not being
used.
e) Pull the two safety latches on the feed table
toward the center of the laminator.
Bottom view
of feed table
Safety latches
