Page 6 - 13
Applications
Explorer 107 Operation and Maintenance Manual
© GBC Pro - Tech December 1999
c) Raise the front safety shield.
d) Remove the pressure plate and feed table.
W A R N I N G
Extreme caution should be exercised
when gripping the film near the
heating components.
e) Grip the laminate from the front of the laminator
near the nip rollers and pull straight back.
f) Clean the heating components as described in
Section 8 Maintenance.
g) Press POWER to “ O ” if finished with the
laminator.
!
AM
AT
M d x
u v
g
V
H
u u
A
P
u
u
W
u
g U
u
g
u
k
A
M x
g
d
# # # # # # #
M d
qu
S
T
O
P
E
M
E
R
G
E N C Y
P o w e r
6.4 Parameter Charts
Parameter charts are starting references only.
Temperature and speeds will vary. Adjust your settings
accordingly for optimal ouput quality..
INFORMATION
Temperatures and speeds will vary due to
environment conditions, humidity, film
ratios, film thickness, film composition,
operator experience, line voltage and stock.
For films not listed in the parameter charts, consult
your sales representative or the film manufacturer for the
recommended temperature and speed settings.
Parameter charts for Nap-Lam II, Nap-Lam I
and Premium films with respect to 20# bond, 60# bond
and 80# bond stock are proveded in SAE and Metric.
Refer to Charts 6.4.1 through Charts 6.4.6.
Use the conversion chart ( Chart 6.4.7 )
provided for temperatures not shown within the
parameter charts.
