Page 4 - 10
Installation
Explorer 107 Operation and Maintenance Manual
© GBC Pro - Tech December 1999
Operations Control panel
INFORMATION
When any command is pressed ( with the
exception of Reverse ) on the Operations
Control Panel, a "beep" will sound. If the
command is held down, the panel will
continuously "beep".
a) Press
O N
under COOLING FAN.
COOLING FAN
ON
OFF
- Cooling fans turn on.
b) Press
O F F
under COOLING FAN.
COOLING FAN
ON
OFF
- Cooling fans turn off.
e) Rotate the E-STOP clockwise to reset.
Rotate
4.6 Control panel check
INFORMATION
When the laminator is first turned on, the
control panels display the default settings.
Default setting; Cooling Fan = Off, Motor
Speed = Off, Top Teflon Roller = 32
o
F, Nip
Rollers = 32
o
F, Bottom Teflon Roller = 32
o
F and Sub Heaters = 32
o
F.
The control panels should be checked to ensure
all controls function properly.
For a detailed explanation of the control panels,
refer to Section 5 Operations.
