Page 1 - 8
Safety
Explorer 107 Operation and Maintenance Manual
© GBC Pro - Tech December 1999
Caution should always be exercised when
using the rear cut-off blade.
Sharp blade can cut you!
W A R N I N G
Keep hands and fingers away from the
path of the rear cut-off blade.
Sharp blade can cut you!
W A R N I N G
1.4 Operations
The following symbols are positioned at
various points in Section 5 Operations.
W A R N I N G
Do not wear ties, loose fitting clothes or
dangling jewelry while operating or
servicing the laminator. These items can get
caught in the nip and choke you or you can
be crushed or burned.
INFORMATION
When any command is pressed ( with the
exception of Reverse ) on the Operations
Control Panel, a "beep" will sound. If the
command is held down, the panel will
continually "beep".
INFORMATION
1 increment on the Motor Speed Adjust
is equal to approximately 3.5 ft./ min.
( 1.1 m/ min. ).
INFORMATION
Reverse speed can be controlled by
Speed Adjust.
INFORMATION
Always use the minimum film tension
necessary to complete the task.
