GAC MOTOR GS3 Скачать руководство пользователя страница 214

Страница: 214 / 261

208

6. In-service maintenance

Precautions for wheel failure

When driving over curbs or similar

obstacles, keep a slow speed in the

vertical direction of the obstacles as much

as possible.

Be careful not to let the tires contact with

grease, oil and fuel.

Regularly check the damage status of

tires (i.e., splitting, abrasion, shedding,

deformation or bulging).

Regularly remove debris embedded in the

grooves of the tire pattern.

Instructions for storing tires

Before removing the tire, make a mark on

the tire to indicate the rotation direction

of the tire. Refit the tire according to the

mark to ensure the rotation direction and

the dynamic balance of the wheel are

unchanged.

Store the removed wheels or tires in a

cool, dry place, and preferably in a dark

place.

The tire mounted on the rim must not be

stored upright.

New tires and wheels

Select the new tire and wheel carefully,

and make sure that the dimensions, load

range, rated speed and structure type of

new tire are the same as those of original

one.

Replace at least two tires on the same

axle at the same time, rather than only

one tire individually.

Do not use tires of different dimensions or

types, and do not mix summer tires, all-

season tires and winter tires in use.

Once wheels are installed, check whether

the tightening torque of the wheel bolts

(125±10Nm) meets the requirements.

Non-full-size spare tires*

Spare tires and standard tires are different

in aspects such as structure, pattern,

speed rating and load index, and cannot be

exchanged.
After emergency use of the spare tire, it is

necessary to drive safely to the GAC Motor

authorized shop or the wheel repair shop as

soon as possible to replace it with a standard

tire, so as to avoid the hidden safety hazards

of long-term use of the spare tire.

WARNING

● Spare tir es can only be used

temporarily for emergency, and the

maximum driving speed shall not

exceed 80 km/h.

● The storage and service life of spare

tires is 6 years. It is prohibited to use

them beyond the time limit.

Содержание GS3






































































































































































































































































Результаты поиска

Содержание GS3

Отзывы:

Похожие инструкции для GS3

Бренды по названию

Популярные бренды

GAC MOTOR GS3, Руководство пользователя

Результаты поиска

Содержание GS3

Отзывы:

Похожие инструкции для GS3

Бренды по названию

Популярные бренды