GAC MOTOR GS3 Скачать руководство пользователя страница 179

Страница: 179 / 261

173

5. Driving guide

Running-in of tire and brake lining

Within the first 500km of driving, drive the

vehicle at a moderate speed to get the new

tires run in fully.
Within the first 200km-300km of driving, the

brake linings have not reach the optimal friction

condition, so please drive at a low speed and

avoid emergency braking as much as possible.

WARNING

● A new tire and brake lining will not

have the best adhesion and friction

characteristics without running-

in. Therefore, drive the vehicle

cautiously within the first 500km to

get the tires fully run in to prevent

accidents.

● Newly replaced brake lining shall

be run in according to the above

requirements as well.

● During driving, keep an appropriate

distance from other vehicles to

prevent emergency braking, as the

new tires and brake linings have not

been fully run in at this time and if

an emergency braking is applied, a

traffic accident is likely to occur.

5.7.3 Driving essentials

Precautions under various road conditions:

When the vehicle is driving on a road with

crosswinds and gusts, please decelerate

in advance and control the speed and

steering wheel.

Avoid driving on sharp-edged objects or

other road obstacles, otherwise it may

cause serious damage such as tire burst.

Reduce the speed and drive at a low

speed while driving on a bumpy or uneven

road; otherwise the chassis may be

scratched, which result in vehicle damage.

When the vehicle is being driven downhill,

decelerate and downshift in advance (in M

mode of AT or for the vehicle models with

MT); avoid emergency braking, otherwise

the brake system will overheat or be worn

prematurely.

When the vehicle is running on a slippery

road, be careful during accelerating,

upshifting/downshifting (in M mode of

AT or for the vehicle models with MT) or

braking; avoid sudden acceleration or

emergency braking, otherwise it is likely

to cause wheel slip.

When the vehicle is running on an icy or

snowy road, drive at a low and constant

speed; avoid sudden acceleration or

emergency braking and install tire chains

for the wheels when necessary.

Precautions while driving over a water-

logged road section:

1. Before driving over a water-logged road

section, check the depth of water, which

shall not be higher than the lower edge of

the vehicle body.

2. Before driving through water, switch off

the A/C before starting, decelerate and

then gently depress the accelerator pedal

without release to drive over the water-

logged road section at a stable and low

speed.

3. Do not stop the vehicle, reverse or shut

down the engine in water.

4. After the vehicle is successfully driven

through the water-logged road section,

gently depress the brake pedal for several

times to evaporate the moisture on the

brake discs so as to restore the braking

performance as soon as possible.

Содержание GS3






































































































































































































































































Результаты поиска

Содержание GS3

Отзывы:

Похожие инструкции для GS3

Бренды по названию

Популярные бренды

GAC MOTOR GS3, Руководство пользователя

Результаты поиска

Содержание GS3

Отзывы:

Похожие инструкции для GS3

Бренды по названию

Популярные бренды