GAC MOTOR GS3 Скачать руководство пользователя страница 191

Страница: 191 / 261

185

6. In-service maintenance

Suspend the fuel filler cap tether on the

inner hook of the fuel tank cap and start

adding fuel.

After adding the fuel, tighten the fuel filler

cap clockwise till a click is heard, which

indicates that the fuel filler cap has been

tightened.

NOTE

Grade of fuel: 92# or above lead-free

gasoline.

NOTE

This model complies with China VI

emission standards. The fuel supply system

of China VI is designed with a closed fuel

and gas recovery system. During refueling,

the fuel gun switch may be triggered due

to high ambient temperature or high fuel

flow rate, and the fuel gun is switched off

when the fuel tank is not filled fully. This

is a normal phenomenon. At this time, the

refueling speed shall be slowed down.

CAUTION

Low-grade fuel or substandard fuel may

damage the engine or make the engine fail

to meet performance requirements.

WARNING

● At any time, be sure to shut down

the engine when refueling, and pay

attention to open flames and fire.

● Please avoid contact of fuel with skin

or clothing.

● Please refuel the vehicle according

to the vehicle fuel grade. If fuel not

complying with the regulations is

added accidentally, do not start the

engine. Please contact the GAC

Motor authorized shop immediately

for treatment.

Содержание GS3






































































































































































































































































Результаты поиска

Содержание GS3

Отзывы:

Похожие инструкции для GS3

Бренды по названию

Популярные бренды

GAC MOTOR GS3, Руководство пользователя

Результаты поиска

Содержание GS3

Отзывы:

Похожие инструкции для GS3

Бренды по названию

Популярные бренды