GAC MOTOR GS3 Скачать руководство пользователя страница 178

Страница: 178 / 261

172

5. Driving guide

Inspections after starting/during driving

Check whether the instrument cluster

works properly; check whether any

indicator lamp comes on or any alarm

message is shown, etc.

Check whether all controls (such as the

lamplight combination, wiper combination

and defrost switches) work properly.

Check that the vehicle does not deviates

to one side during braking on a road

without safety risks.

Check for other anomalies, such as part

looseness, leakage and unusual noise.

5.7.2 Driving during running-in

period

In order to prolong the service life of the

vehicle, the vehicle shall be subject to running-

in of certain mileage before it is brought into

use. Please comply with the following rules in

the running-in period:
-

The mileage in the running-in period shall

be 1500km.

Choose roads in good condition and drive

it at reduced load and limited speed.

Do not start the engine with full throttle or

drive with harsh acceleration.

Avoid emergency braking in first 300 km.

Strictly follow the operating procedures

and make sure that the engine has

reached normal operating temperature.

Do not change the oil before regular

maintenance.

Carry out daily maintenance of the vehicle

carefully; check and tighten the external

bolts and nuts frequently; check the

sound and temperature changes of the

assemblies generated by operation and

adjust them timely.

Engine running-in

The mileage in the running-in period of a

new engine shall be 1500km. Within the first

1000km of driving:

Keep the vehicle speed no more than 3/4

of the maximum allowable speed.

Do not drive the vehicle with full throttle.

Avoid running the engine at high speed.

Do not tow any trailer.

Within 1000km-1500km, it is allowed to

increase the engine & vehicle speeds gradually

to the maximum allowable range.
The internal frictional resistance of the engine

at the beginning of running-in is much greater

than that after running-in, and all the moving

parts of the engine can have the best fitting

after running-in.
After fully running in, both the service life

and the fuel efficiency of the engine can be

improved.

Содержание GS3






































































































































































































































































Результаты поиска

Содержание GS3

Отзывы:

Похожие инструкции для GS3

Бренды по названию

Популярные бренды

GAC MOTOR GS3, Руководство пользователя

Результаты поиска

Содержание GS3

Отзывы:

Похожие инструкции для GS3

Бренды по названию

Популярные бренды