GAC MOTOR GS3, Руководство пользователя

Страница: 136 / 261

130
5. Driving guide
5.1 Starting and driving
5.1.1 Ignition switch
ENGINE START/STOP button*
The ENGINE START/STOP button works
only when the intelligent remote control key is
detected in the vehicle.
When the transmission gearshift lever is in “P”
position and the brake pedal is depressed, the
ENGINE START/STOP button indicator lamp
will turn green. At this time, press the ENGINE
START/STOP button to start the engine.
When the automatic transmission gearshift
lever is set to “P” position and the brake pedal
is not depressed, press the ENGINE START/
STOP button to switch between positions in
the following order: “OFF → ACC → ON →
OFF...”.
- OFF: The ENGINE START/STOP button
indicator lamp goes out, and the ENGINE
START/STOP button is switched off.
- ACC: The ENGINE START/STOP button
indicator lamp turns orange, and the
circuits of 12V power supply and other
accessories are connected.
- O N : T h e E N G I N E S TA R T / S T O P
button indicator lamp turns orange, the
instrument cluster backlight comes on,
and the circuits of all electrical consumers
are connected.
NOTE
● When the gearshift lever of the
automatic transmission is in a position
other than “P” and the brake pedal
is not depressed, press the ENGINE
START/STOP button to switch it from
“OFF” to “ACC”. If the ENGINE START/
STOP button is pressed repeatedly,
it will be switched in the sequence of
“ACC→ON→ACC…”, rather than return
to “OFF”.
● Under normal circumstances, the
positions can only be switched cyclically
in turn, that is, from “ACC” to “ON”.
However, when the transmission
gearshift lever is in “P” position and the
ENGINE START/STOP button remains
in “ACC” position for one hour, the
vehicle will enter the battery saver mode
and the ENGINE START/STOP button
automatically returns to “OFF” position.
● For MT models, it is recommended to
operate the ENGINE START/STOP
button when the manual transmission
gearshift lever is in the N position.
5. Driving guide