GAC MOTOR GS3, Руководство пользователя

Страница: 240 / 261

234
8. Accident handling
WARNING
● The jack on the vehicle can only be
used to lift the vehicle rather than
other heavy objects or vehicles.
● While using the jack, do not start the
engine; otherwise an accident may
occur.
● While lifting the vehicle with a jack,
remember not to place any part of
your body under the vehicle to avoid
accidents.
● If it is required to work under the
vehicle, be sure to place a suitable
protective support under the vehicle.
Installing spare tire
- Install the spare tire to the vehicle.
- Install all the wheel bolts, and pre-tighten
them using the wheel bolt removal wrench
in the order of 1~5 as shown.
- Give a verbal alert to confirm that nobody
is around the vehicle, and then rotate the
jack wrench counterclockwise to lower the
vehicle.
- Tighten all wheel bolts using the wheel
bolt removal wrench.
- In order to avoid the noise of the vehicle
during driving later on, please remember
the locations of various tools, put them
back in place after use and fix them.
CAUTION
After installing the wheel, please go to
the GAC Motor authorized shop in time to
check the tightening torque of the wheel
bolts (125±10Nm). Otherwise, the bolts
may loosen while the vehicle is running,
easily causing traffic accidents.
WARNING
● The thread on the wheel bolt and the
hub must be kept clean and free from
adherent matters such as grease so
that the bolt is easy to tighten.
● For replacement of a tire, if the bolts
are rusted or difficult to be tightened,
they must be replaced and the thread
hole cleaned.
● When the spare tire is not in use, it
must be securely fixed in the place
where the spare tire is mounted.