GAC MOTOR GS3, Руководство пользователя

Страница: 169 / 261

163
5. Driving guide
When the indicator lamp lights up
in green, if no condition mentioned above
happens and the vehicle departures from the
lane (due to the driver’s fatigue, distraction
or phone calls, etc.), the system will alert the
driver by flashing the lane marking reminder
on the instrument cluster and beeping, and the
indicator lamp
will turn amber.
Image Meaning
Left departure
Right departure
Function limitations
The LDW, even activated, may involve
wrong or failed detection of lane marking
due to inevitable environmental factors
and conditions. It may become affected or
inoperative under the following conditions:
-
Poor line of sight, such as snow, rain, fog
or water spots.
- Dirty or foggy windshield, or obstruction in
front of the windshield camera.
- Overtemperature around the camera due
to direct sunlight.
- Glare due to direct sunlight, oncoming
traffic, reflected light from road water-
logging, etc.
- Sudden changes in outdoor brightness,
such as entering/exiting tunnels.
- Headlamp not turned on at night or when
the light illumination is low in tunnels.
- N o l a n e m a r k i n g , o r d i ff i c u l t y i n
distinguishing the lane marking color from
the road surface color.
- Fishbone-shaped (FS) markings with
speed reduction sign.
- Red lane marking on road due to road
maintenance.
- Unobvious, too thin, worn, blurred or dirt/
snow-covered lane markings.
- Too wide or narrow lanes.
- Increase or decrease in lanes, or
complicated routing of lane markings.
- More than two lane markings on the left
and right sides of the vehicle.
- Marks or objects similar to lane markings
on roads.
- Isolation strips or other objects casting
shadows on lane markings.
- Short-term change of marking, such as
ramp or highway exit.
- Driving on steep slopes or curved roads.
- Close distance from the vehicle ahead
or lane markings blocked by the vehicle
ahead.
- Severe shaking of the vehicle.