GAC MOTOR GS3, Руководство пользователя

Страница: 60 / 261

54
4. Operation of systems and equipment
Battery replacement steps
- Key for models with ENGINE START/
STOP button*: Pull the switch in the
direction of arrow A and pull out the
emergency mechanical key in the
direction of arrow B.
- Key for models with conventional ignition
switch*: The mechanical key will pop out
when the button ① is pressed.
Switching between audible-visual alarm
and visual alarm
The visual alarm is to remind the owner of the
vehicle only through the flashing of the turn
signal lamps; the audible-visual alarm is to
remind the owner of the vehicle through both
the flashing of the turn signal lamps and the
sounding of the horn.
When the ENGINE START/STOP button is
in the “OFF” position, if the and buttons
on the remote control key are pressed and
held for 2 s at the same time, the audible-
visual alarm and the visual alarm can be
switched between each other. If the switching
is successful, the turn signal lamps will flash 3
times (only for electronic anti-theft alarm).
NOTE
The switching function is only applicable
to the anti-theft alarm. For details, please
refer to the basic operations of body anti-
theft. => See page 69
Battery replacement
Each time you press the buttons on the
remote control key, the indicator lamp of the
key will flash once. If the indicator lamp fails
to flash, or you need to press the buttons
several times to lock or unlock the doors, the
battery may be exhausted or about to run out.
It is recommended to go to the GAC Motor
authorized shop for the battery replacement.
CAUTION
● Be sure to replace the battery with a
new one of the same rated voltage and
size.
● An inappropriate battery may damage
the remote control key.
● Always comply with relevant environmental
regulations to dispose the exhausted
battery.