GAC MOTOR GS3, Руководство пользователя

Страница: 166 / 261

160
5. Driving guide
PDS fault indication
- When the PDS is faulty, the instrument
cluster will display a message reading
“PDS is not available” to the driver.
NOTE
The PDS is still subject to the limitations
of some physical conditions, and it may
be unable to play its full within the vehicle
speed range specified by the system.
Therefore, the driver is required to apply
effective braking when necessary. The
response of the PDS, including alarm, and
braking or avoiding pedestrians with the
help of the brake pedal, depends on the
practical conditions.
● The PDS may fail to avoid some
collisions or serious injuries in some
occasions.
● I n c a s e o f s o m e c o m p l e x r o a d
conditions (such as curved roads), the
PDS may response to some targets of
similar shape or size with pedestrians
and then issue an unnecessary alarm or
brake the vehicle unnecessarily.
NOTE
● When the PDS is faulty, for example,
due to inaccurate camera sensor angle,
there may be unwanted alarms or
vehicle braking.
● The driver shall always be ready to
take over control of the vehicle when
necessary.
● If the PDS is activated to brake the
vehicle, the driver will feel hard while
depressing the brake pedal.
● W h e n t h e d r i v e r d e p r e s s e s t h e
accelerator pedal or turns the steering
wheel, the active brake assist function
activated by the PDS will be deactivated.
● If the PDS has the anomalies other than
those described above (for example,
repeated abnormal activation), please
deactivate the PDS and go to the GAC
Motor authorized shop for inspection in
time.
WARNING
● Never ignore any suddenly activated
warning lamp and reminder displayed
on the instrument cluster, otherwise
a traffic accident and even serious
injuries may occur.
● The system may have no time to
help the driver in avoiding a collision
after issuing an alarm, so the driver
shall observe the vehicle status and
surrounding environment to ensure
driving safety.