GAC MOTOR GS3, Руководство пользователя

Страница: 251 / 261

245
8. Accident handling
8.8 Emergency start
Jumper cable
If the engine cannot start because the battery
is too low, it can be started by connecting
this battery to the battery of another vehicle a
jumper cable.
WARNING
● The engine compartment is a high-
risk area. Improper operation can
easily cause casualties.
● Before starting work on the battery,
be sure to carefully read and follow
the warning instructions for safety
related to battery operation.
While connecting the batteries of two vehicles,
be sure to first connect the positive terminal
and then the negative terminal.
- Set the ignition switch to the “OFF”
position.
- Connect end
①
of the red cable to the
positive terminal (+) of the depleted
battery “A”, and end ② to the positive
terminal (+) of the power battery “B”.
- Connect end ③ of the black cable to
the negative pole (-) of the power battery
“B”, and connect end
④
to the engine
block or a metal part firmly connected to
the engine block of the vehicle with the
depleted battery “A”.
CAUTION
Properly place the jumper cable to avoid
contact between the cable and the moving
parts of the engine.
- Start the engine of the vehicle with power
battery and let it idle. Then, start the
engine of the vehicle with the depleted
battery till the engine runs smoothly.