GAC MOTOR GS3, Руководство пользователя

Страница: 199 / 261

193
6. In-service maintenance
Replacing rear windshield wiper blades
- Hold the wiper arm ① by hand, and push
the wiper blade ② as arrowed to remove
it.
- Install the new wiper blade into the wiper
arm
- Gently put the wiper arm back into the
windshield.
If replacing wiper blades is required, it is
recommended to go to the GAC Motor
authorized shop for replacement.
CAUTION
● When lifting the wiper arm, please grasp
the wiper arm with hands, rather than
grasp the soft wiper blade.
● New wiper blades with the same length
and specifications as the previous ones
must be used.
● Be careful while lowering the wiper arm
to prevent it from falling and hitting the
windshield instantly.
● The status of the wiper blades must
be checked regularly, and the wiper
blades must be replaced as specified.
Damaged wiper blades must be
replaced in time.
● Excessively worn or dirty wiper blades
are very easy to scratch the windshield
and will affect the field of vision when
used, reducing driving safety.
6.4.5 Brake fluid
Function of brake fluid
Brake fluid is used to transmit power in the
hydraulic brake system of the vehicle.
The brake fluid is water-absorbent, so it
can continuously absorb moisture in the
surrounding air during use. If the brake fluid
stays in the system for too long and absorbs
too much moisture, air resistance will generate
in the system pipeline during braking, reducing
the braking effect and impairing driving safety;
it may even cause the complete failure of
the brake system, resulting in accidents.
Therefore, be sure to go to the GAC Motor
authorized shop to check the brake fluid level
or change the brake fluid according to the
period specified in the
Warranty Manual
.
NOTE
Specifications of brake fluid: DOT4.