GAC MOTOR GS3, Руководство пользователя

Страница: 197 / 261

191
6. In-service maintenance
CAUTION
● When the engine or the intercooler
has not been cooled down, the cooling
system is under high pressure. In this
case, do not open the expansion tank
cap, otherwise the emerging coolant will
cause scald.
● Coolant can only be added after the
engine or the intercooler has cooled
down. The coolant level after filling must
not exceed the maximum scale mark
“MAX”. Otherwise, when the engine is
started and the cooling system is under
high pressure, coolant will overflow.
● Only fresh coolant is allowed to be
added.
WARNING
● It is forbidden to mix coolant that is
not approved by our company in the
original coolant.
● In case of emergency, if other coolant
is used or pure water is added, go to
the GAC Motor authorized shop to
clean the cooling system and change
the coolant in time.
● If the too much coolant is consumed
or it is consumed too fast, there
may be a leak in the cooling system.
In this case, please go to the GAC
Motor authorized shop for inspection
in time.
● Coolant must be contained in the
original container, and kept out of
children’s contact to avoid poisoning
due to accidental ingestion.
6.4.4 Windshield washer fluid
and wiper blades
Adding windshield washer fluid
If the level of the washer fluid is too low, the
washer fluid shall be added in time.
CAUTION
Do not mix and use the windshield washer
fluid with other cleaning liquids. Otherwise,
the washer fluid will decompose and block
the nozzle of the windshield washer.