GAC MOTOR GS3, Руководство пользователя

Страница: 175 / 261

169
5. Driving guide
5.5.2 Reverse image system *
The reverse image system can cover the
video at a wide angle up to 130° and display
a wide-range image behind the vehicle on the
AV system display to allow the driver to know
various complex road conditions behind the
vehicle and improve the safety of reversing.
On and Off
With ignition switch set in “ON”, the reverse
image system will automatically start working if
the gearshift lever is moved to the “R” position.
In this case, the AV system display will begin to
show the image behind the vehicle and display
the dynamic trajectory in the reverse image.
If the gearshift lever is move out of the
“R” position, the reverse image system
automatically will stop working and the AV
system will exit from the reverse image.
WARNING
The reverse image system cannot take
the place of the driver’s observation to
the surrounding environment. The driver
shall be concentrated and reverse safely
according to the actual conditions.
Dynamic trajectory
The lines appearing on the display represent
the dynamic trajectory of the vehicle body and
wheels as you turn the steering wheel, which
can be used as reference lines to determine
the size of the desired parking space when you
are reversing or parking.
CAUTION
The above-mentioned distances are
obtained by tests on the flat ground, and
are only used as references for visual
distance judgment. In case of driving on a
slope, the above distances cannot be used
as accurate references.
NOTE
● The vertical lines on both sides of
the distanced reference lines can be
used as reference lines for judging the
parking space you need when reversing
or parking.
● The distanced reference lines can be
adjusted constantly as the steering
wheel is turned.