Furuno FAR-1416, Руководство оператора

Страница: 73 / 226

1. OPERATIONAL OVERVIEW
1-59
1. Open the [MAIN MENU].
2. Select [CURSOR/OWN SHIP MARK], then press the
left button .
3. Select [BARGE MARK], then press the left button .
4. Select [BARGE MARK], then press the left button .
5. Select [ON] to display barge marks, [OFF] to hide
barge marks, as appropriate, then press the left but-
ton .
6. Select [BARGE SIZE], then press the left button . Use
the scrollwheel to enter the [LENGTH] and [WIDTH] of
the barge.
Rotate the
scrollwheel to increase or decrease the value of the highlighted digit.
7. Select [ARRANGEMENT], then push the left button . This item lets you set a sin-
gle barge or a barge chain. Select one of the five arrangements and rotate the
scrollwheel . Select number of barges (max. 9) to display. As you rotate the
scrollwheel the squares light or extinguish and the number of barges selected
appears at the right side.
8. Close the menu. The barge mark is now displayed as shown in the figure above.
1.42 How to Adjust Brilliance of On-screen Data
On-screen markers and alphanumeric readout brilliance can be adjusted using the fol-
lowing procedure:
1. Move the cursor onto the [BRILL] box at the bottom-left of the screen, then press
the right button . The [BRILL] menu appears.
[BARGE MARK]
1. BACK
2. BARGE
MARK
OFF/ON
3. BARGE
SIZE
LENGTH 0ft
WIDTH 0ft
4. ARRENGEMENT
0
0
0
0
0
4
9
9
9
4
X
First row of barge [ARRANGEMENT] is displayed
as the left side of the barge icon on-screen.
Own ship icon
[BRILL1 MENU 1/3]
1. BACK
2. INITIAL SETTING READ
DAY/DUSK/NIGHT
NO/YES
3. ECHO
COLOR
YEL / GRN / WHT
AMB/M-GRN/M-CHA
4. CHAR
COLOR
GRN/WHT1/WHT2/ORG/RED
5. RADAR
BACKGROWND COLOR
BLK/BLU1/BLU2
6. CONTROL
PANEL
7. CHARACTER
8. CURSOR
9. ECHO
0. NEXT
[BRILL1 MENU 2/3]
1. BACK
2. TRAIL
3. HEADING
LINE
4. RING
5. BEARING
CURSOR
6. EBL
7. VRM
8. PI
LINE
9. TARGET
0. NEXT
[BRILL1 MENU 3/3]
1. BACK
2. L/L
GRID
3. MARK
4. CHART
5. DEPTH
LINE