Furuno FAR-1416, Руководство оператора

Страница: 4 / 226

ii
SAFETY INSTRUCTIONS
DANGER
WARNING
CAUTION
WARNING WARNING
Model Radiator
FAR-1416
XN12A
XN13A
XN13A
XN12A
N/A
N/A
0.4 m
0.6 m
2.1 m
1.9 m
3.1 m
4.6 m
FAR-1426
The operator must read the applicable safety instructions before attempting to operate the equipment.
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
could result in minor or moderate injury.
Warning, Caution Prohibitive Action Mandatory Action
Radio Frequency
Radiation Hazard
The radar antenna emits electromagnetic
radio frequency (RF) energy which can be
harmful, particularly to your eyes. Never
look directly into the antenna aperture
from a close distance while the radar is in
operation or expose yourself to the
transmitting antenna at a close distance.
Distances at which RF radiation level of
100 and 10 W/m
2 are given in the table
below.
Note: If the antenna unit is installed at a
close distance in front of the wheel house,
your administration may require halt of
transmission within a certain sector of
antenna revolution. This is possible. Ask
your FURUNO representative or dealer to
provide this feature.
100W/m
2
10W/m
2
WARNING
ELECTRICAL SHOCK HAZARD.
Do not open the equipment.
Turn off the radar power switch
before servicing the antenna
unit. Post a warning sign near
the switch indicating it should
not be turned on while the
antenna unit is being serviced.
Only qualified personnel should
work inside the equipment.
Prevent the potential risk of being
struck by the rotating antenna
and exposure to RF radiation
hazard.
Do not disassemble or modify
the equipment.
Fire, electrical shock or serious
injury can result.
Immediately turn off the power
at the ship’s mains switchboard
if water leaks into the equip-
ment or the equipment is emit-
ting smoke or fire.
Continued use can cause fatal
damage to the equipment.
Use the proper fuse.
Use of a wrong fuse can result
in damage to the equipment or
cause fire.