Furuno FAR-1416, Руководство оператора

Страница: 220 / 226

FURUNO
FAR-1416/1426
SP - 2
E3650S01D-M
3.9 Orientation mode Head-up, STAB Head-up, North-up, Course-up, Stern-up,
Destination-up, True-motion
3.10 Marks Cursor, Radar ring, Heading mark, North mark, Bearing line,
Vector, Map mark, Zoom, VRM, EBL, Acquisition zone
3.11 Target tracking (TT) Auto or manual acquisition: 50 targets in 0.2-32 NM
Time of vector: 30 s to 60 minutes
3.12 Target analyzer Distinguish target type and display with different colors
3.13 AIS Display capacity: 100 targets
Time of vector: 30 s to 60 minutes
3.14 Echo trail True/Relative,
Trail length: 0, 15/30 sec, 1 to 30 minutes or continue
4 PLOTTER FUNCTIONS
4.1 Projection Mercator
4.2 Usable area 85° latitude or below
4.3 Geoids WGA84, Tokyo
4.4 Effective Projection area 0.125 NM to 1,024 NM (at equatorial area)
4.5 Memory
capacity
Own ship’s track 30,000 pts
Other ship’s track TT: 10,000 pts /50 ships, AIS: 1,000 pts/100 ships,
Consort ship: 10,000 pts/40 ships, GPS buoy: 10,000 pts/100 sets
Mark/line 30,000 pts
Waypoint 3,500 pts
Route 200 routes with 100 waypoint each
4.6 External memory Waypoint: 100 pts, 1 route
4.7 Electronic chart Mapmedia
4.8 Own ship’s tracking 7 colors
5 INTERFACE
5.1 Number of ports on display unit
Heading input 1 port: AD-10 format or IEC61162-1
Serial I/O 3 ports: IEC61162-1
Contact closure 3 ch: Alert output (Normal open: 2 ch, Normal close: 1 ch)
Remote display 2 ports (Signal: HD, BP, Trigger and Video)
LAN 1 port, Ethernet 100Base-TX
CANbus 1 port, NMEA2000, contact pin connector
USB 2 ports, USB 2.0, for data backup or control
DVI 1 port, DVI-D connector
RGB 1 port, RGB monitor or VDR
5.2 Data sentences
Input ALR, CUR, DBK, DBS, DBT, DPT, GGA, GLL, GNS, HDG, HDM,
HDT, MTW, MWV, RMB, RMC, RTE, THS, TLL, TTM, VBW, VDM,
VDO, VDR, VHW, VTG,VWR, VWT, WPL, ZDA
Output
Serial port
TLL, TTM