Furuno FAR-1416, Руководство оператора

Страница: 72 / 226

1. OPERATIONAL OVERVIEW
1-58
5. Close the menu.
1.41.5 How to set up the own ship symbol
The own ship symbol marks own position on the display. It can be turned on or off and
its configuration selected from the [MARK] menu. Two configurations are available:
minimized symbol and scaled symbol. The scaled symbol is scaled to indicate the
length and beam of the vessel. Ship’s dimensions should be entered at installation to
use the scaled ship symbol.
1. Open the [MAIN MENU].
2. Select [CURSOR/OWN SHIP MARK], then press the
left button .
3. Select [OWN SHIP MARK], then press the left button .
4. Select [OWN SHIP MARK DISPLAY], then press the left button .
5. Select [MIN] or [SCALED] as appropriate, then press the left button .
6. Close the menu.
Note: The own ship mark appears with white circle on the plotter screen. To erase the
plotter own ship mark, set [PLOTTER OWN SHIP MARK] to [OFF] of the [OWN SHIP
MARK] in [CURSOR/OWN SHIP MARK] menu.
1.41.6 Cursor setting
You can set the cursor properties. Do the following procedure.
1. Open the [MAIN MENU].
2. Select [CURSOR/OWN SHIP MARK], then press the
left button .
3. Select [CURSOR], then press the left button .
4. Select item to change the property, then press the left
button .
Select a property to change, then press the left but-
ton .
• Cursor bearing: sets the bearing relative/true.
• Cursor range: sets the unit of cursor range (NM/km/SM).
• Cursor size: sets the cursor size small/large.
• Cursor color: sets the cursor color among seven colors.
5. Close the menu.
1.41.7 How to set the barge mark
You can mark the locations of barges on the display with icons. Set up barge informa-
tion as follows:
Scaled symbol Minimized symbol
Heading line
Beam line
(set as hull
beam width)
X
Antenna
position
Heading line
Beam line
[CURSOR]
1. BACK
2. CURSOR
BEARING
REL/TRUE
3. CURSOR
RANGE
NM/km/SM
4. CURSOR SIZE
SMALL/LARGE
5. CURSOR
COLOR
RED/GRN/BLU/YEL/CYA/
MAG/WHT