Furuno FAR-1416, Руководство оператора

Страница: 184 / 226

6. DATA SAVE AND READ
6-12
6.5 Data Reloading
You can load data from other equipment to internal memory in this equipment.
Note: The data transfer should be done by a technician. Contact your local dealer to
do this procedure.
1. Insert the USB memory which has the required data to the USB port on control
unit.
2. Open the main menu.
3. Select [MEMORY REC./PLAY.], then press the
left but-
ton .
4. Select [NEXT], then press the left button .
5. Select [RELAY DATA], then press the left button .
GD-X80 includes GD-280 (BB), GD-380 and GD-680.
Note: [GD-X80(FLOPPY)], [GD-188(FLOPPY)] and [GD-
300/700] are unusable.
6. Select the model, then press the left button .
Following figure shows an example for [GD-X80(CARD)].
7. Select the item preferred, then press the left button .
8. Select [YES], then press the left button .
9. Repeat step 7 and 8 to load other data.
10. Select [SEL DATUM], then press the
left button .
11. Select [WGS-84] or [TOKYO], then press the left button .
12. Select the file to load, then press the left button .
13. Select [RUN], then press the left button .
The confirmation message appears.
14. Close the menu.
[RELAY DATA]
1. BACK
2. GD-X80(CARD)
3. GD-X80(FLOPPY)
4. GP-3500
5. GP-3000 SERIES
6. GD-500
7. GD-188(CARD)
8. GD-188(FLOPPY)
9. FAR-21x7
10. GD-300/700
GD-X80 (CARD)
REC OWN TRK
REC OTHER TRK
REC MARK/TRACK
REC ROUTE/WPT
SEL DATUM
: YES NO
: YES NO
: YES NO
: YES NO
: WGS-84 TOKYO
: 1037 /30000
: 0 /10000
: 32 /10000
: 16 /10000
: 0 /10000
: 6 /30000
OWN TRK
OTHER TRK (CONS)
OTHER TRK (AIS)
OTHER TRK (TT)
OTHER TRK (GPS BUOY)
MARK/LINE CURRENT USAGE
TURN WHEEL : SELECT PRESS LEFT BUTTON : ENTER
PRESS RIGHT BUTTON : CLOSE
SELECT THE FILE TO RECORD
DATA SELECTION
FILE NAME SEL PAGE_
OWN TRK OTR TRK MARK WPT ROUTE