Fukuda VaSera VS-2000 Series, Руководство по эксплуатации

Страница: 42 / 234

1-8
Chapter 1 Preface
■
Control keys
The following is an outline of the functions of each part.
1) AC Power Indicator (Blue)
When the device is connected to an AC outlet, the LED is
lit faintly. When the device is turned ON, the LED is lit
brightly.
2) Charge Lamp (Blue/Yellow)
During charging, the LED lights in blue. When charging
is completed, the LED turns OFF. If an error occurs
during charging, the LED lights in yellow. (Refer to
"Charging" (P2-3) )
3) POWER Key
Turns the device ON and OFF. Hold down the button 1
second or longer to turn OFF. The device can also be
turned ON and OFF using the power switch on the
display unit. When the power is turned OFF, the device
will enter into standby mode and the AC power indicator
will light faintly.
4) Vents
Air inlets and outlets for the cooling fan in the device.
To ensure the necessary air flow, do not block these vents.
A minimum space of 5 cm is also required between the
rear and side of the device and the wall.
5) USB1 and 2 ports
Insert a USB memory (optional).
6) USB3 ports
Insert a USB memory (optional). Use this to store or read
data.
7) SD Card Slot
Insert an SD card (optional). Use this to store or read
data.
Do not remove the SD card or USB memory or turn off the
device during operation of the SD card or USB memory.
8) DISPLAY Connector
Connects the cable from the display unit.
9) LAN connector
Connects the device to the DMS (data management
system) via LAN. (Refer to "Connecting to the Network"
(P2-16) )
10) IB connector
Connects the connection cable of the BPU-100 for
measuring blood pressure in the toes.
11) Air Connectors
Connect the limb cuff air hoses.
12) PCG Connector
Connects the PCG microphone.
13) Slot for Additional Pulse Wave Unit
A slot for adding an additional BPU-100.
14) Potential Equalization Terminal
Connects the optional ground cable for equipotential
connection.
15) AC Power Supply Connector
Connects the AC power cable. (Refer to "Connecting the
Power Cable" (P2-8) )
16) Battery Compartment
An optional battery (BTE-001) can be inserted here.