manualshive.com logo in svg

Fukuda VaSera VS-2000 Series, Руководство по эксплуатации

Поделиться
Скачать
Fukuda VaSera VS-2000 Series Скачать руководство пользователя страница 58

2-8

Chapter 2 Installation

Connecting the Cables, Hoses, Cuffs and 
PCG Microphone

Connecting the Power Cable

Connect the power cable to the device.

1

Connect the supplied three-prong 
power cable to the power supply 
connector. Connect the other end to a 
hospital-grade outlet.

Connect the three-prong power cable to a hospital grade 
power outlet (three-prong grounded AC power outlet). 
This will automatically ground the instrument. Use only 
the supplied AC power cable. If this device is connected 
with a different cable, danger such as electric shock may 
result to the patient and operator.

• Operate this device using the optional internal battery (BTE-001 battery) if the grounding conditions cannot be confirmed. 

If this device is used with improper grounding, danger such as electric shock may result to the patient and operator.

• Insert the power cable all the way in.
• Do not install the device in a location where it is difficult to plug/unplug the power cable.

• Connect the power cable to a hospital grade outlet.

Grounding is only guaranteed if the device is plugged in by connecting the supplied power cable to a 
hospital-grade three prong grounded outlet.

• Do not bend, crush or twist the air hose of the cuff.

The blockage of the hose will stop the cuff deflation, resulting in obstruction of the blood flow.

• Make sure to use the specified PCG microphone (MA-310HDS(V)).

WARNING

Power Cable

Ground Cable

Main Earthing Bar

Potential 
Equalization 
Terminal

AC Power Connector

Do not use with on-board inverters such as those in an ambulance, as the device is not 

intended for this use.

The cable is properly connnected.

The cable is not properly connnected.

Содержание VaSera VS-2000 Series











































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды