Fukuda VaSera VS-2000 Series Скачать руководство пользователя страница 174

Страница: 174 / 234

10-2

Chapter 10 Recording Daily Reports

Function Buttons Used in These Operations

"Specify Daily Report" Display

[Print]: Prints the daily report.

[Save]: Saves the daily report data to the SD card in CSV format.

[To exam]: Proceeds to the examination.

[Back]: Returns to the menu display.

[

→

]: The function keys can be used to display the second page if there is one.

Recording a Daily Report

Touch the [Menu] button on the touch
panel.

Touch [Daily Report].

Touch the desired recording method.

The content recorded by each recording method is as
follows.
• Today: Prints a daily report for the current day.
• Date: Prints a daily report for the data specified by the

user.

• All: Prints all daily reports recorded in the device.

■

If [Today] is Touched

A daily report for the current day is printed.

■

If [Date] is Touched

Touch [Enter].

Save

To exam

Back

1/2

Содержание VaSera VS-2000 Series











































































































































































































































Результаты поиска

Содержание VaSera VS-2000 Series

Отзывы:

Бренды по названию

Популярные бренды

Fukuda VaSera VS-2000 Series, Руководство по эксплуатации

Результаты поиска

Содержание VaSera VS-2000 Series

Отзывы:

Бренды по названию

Популярные бренды