Fukuda VaSera VS-2000 Series, Руководство по эксплуатации

Страница: 151 / 234

9-1
Chapter
9
File Transfers
This section explains how to transfer files by connecting a memory device to this device or using a LAN.
Functions
Measurement data and examination results can be saved to external media such as a USB memory(*) or SD card. Data can also
be sent to other devices via a LAN. Saved data can be loaded when needed and then compared with other data, modified, copied,
or deleted if it is no longer needed.
●
Below are the formats and capacities of external media supported by this device. (Refer to "Saving
Examination Data" (P9-5).)
• SD card: SD-2G (2GB)
• USB memory(*): TS16GJF600 (16GB), TS8GJF600 (8GB)
• DMS (Data Management System)
This device is compatible with DMS from Fukuda Denshi (VSS).
●
The device can receive or read data saved to other devices. (Refer to "Loading Examination Data" (P9-8).)
*Use a USB memory to move and store files. Use an SD card for ordinary operations.
Handling Media
This section explains precautions that need to be taken when handling the SD card and USB memory.
Precautions when Using the SD Card and USB Memory
Take the following precautions when handling the SD card and USB memory.
• Use only SD cards and USB memory devices specified by Fukuda Denshi
If an external media that is not specified by Fukuda Denshi is used, examination data may not be saved
correctly and it may not be possible to load recorded data.
• Make sure to format the media before using it for the first time.
• Do not bend the media, drop it or subject it to impact.
• Do not remove the media or turn off the power during operation. Also, do not subject this device
to impact or vibration.
This may damage the recorded data or break the card.
• Do not allow any dust to enter the connectors. Also, do not touch the connectors or the terminals
of the SD card with your hands or with metal items. Doing so may cause damage.
• Keep the card in the case supplied with the card and store it in an area without high
temperatures, high humidity, dust or magnets. Do not subject the media to strong impact during
storage.
• Make sure to back up any important data, as data may be damaged as a result of improper handling.
• Other Precautions (Failure to observe these precautions may cause damage.)
• Do not place the media in areas with high temperatures or high humidity, such as near a heater or in
direct sunlight.
• Avoid using or storing media in areas with extreme changes in temperature.
• Do not allow media to get wet.
• Do not disassemble media.
• Avoid using or storing media near magnets or devices with a magnetic field.
• Insert the media in a correct direction.
CAUTION