Fukuda VaSera VS-2000 Series Скачать руководство пользователя страница 202

Страница: 202 / 234

11-26

Chapter 11 Settings of This Device

Saving and Initializing the Settings

The current settings can be saved to the SD card or printed as a report. The settings can also be initialized.

Saving Settings to an SD Card

Insert the SD card into the device.

Touch [Menu] on the touch panel.

Touch [Setting].

Touch [Save settings].

• The current settings are saved to the SD card.

• The settings saved to the SD card can be loaded later

using [Load settings]. This is useful in situations such
as when the same settings need to be configured on
multiple devices.

Network settings (device name, IP address, etc.) are

not saved.

Saving Codes to an SD Card

Insert the SD card into the device.

Touch [Menu] on the touch panel.

Touch [Setting].

Touch [1/2].

Touch [Save Code.].

• The codes registered for Dept. 1-4, Med., Symp., Dr.

Nm1-2 and Tech., along with the names and facility
name, are saved to a file called "TABLE.INI" in the
"ETC" folder on the SD card.

• The codes saved to the SD card can be loaded later

using [Read Code.]. This is useful in situations such as
when the same settings need to be configured on
multiple devices.

Initializing Common Settings

Touch [Menu] on the touch panel.

Touch [Setting].

Touch [Initialize Settings].

All of the common settings are initialized.
The settings for each examination are not initialized.

Initializing Each Setting

Touch [Menu] on the touch panel.

Touch [Setting].

Touch the applicable setting.

Touch [1/2].

Touch [Reset].

The applicable setting is initialized.

Содержание VaSera VS-2000 Series











































































































































































































































Результаты поиска

Содержание VaSera VS-2000 Series

Отзывы:

Бренды по названию

Популярные бренды

Fukuda VaSera VS-2000 Series, Руководство по эксплуатации

Результаты поиска

Содержание VaSera VS-2000 Series

Отзывы:

Бренды по названию

Популярные бренды