Fukuda VaSera VS-2000 Series, Руководство по эксплуатации

Страница: 12 / 234

8
• Do not install or store in an area where the environmental conditions, such as atmospheric
pressure, temperature, sunlight, dust, sodium, sulfur, will adversely affect the system.
• Take care to ensure stability with no inclination, vibration, or impact (including during
transportation). Do not install on an unstable surface.
• Place the device with the base side downward. Do not allow other surfaces (such as the
back or sides) to touch the floor.
• Do not install or store in an area where chemicals are stored or gases are evolved.
• Do not subject the device to excessive vibration or impact when moving to a new
installation location.
• Verify the power frequency, voltage and allowable current (or power consumption).
• Ensure proper grounding by connecting the accompanying power cable to the hospital
grade outlet.
• To ensure the safety of medical devices, do not keep standard electrical devices in areas
with patients.
Before operating the system, verify the following items:
• Verify the power voltage.
• Multi-tap power outlets cannot be used as they may make the device unsafe for the patient
and operator.
• Check the cable connection and polarity of the device and its connectors to ensure proper
operation of the equipment.
• Make sure the power system has adequate earth ground.
• Ensure that all cables and air hoses are correctly and safely connected.
• Pay special attention when the equipment is used in conjunction with other equipment as it
may cause erroneous diagnosis and danger.
• Ensure that all cables directly connected to patients are correctly connected.
During operation of the system, verify the following items:
• Make sure that the electrodes and lead cord tips do not touch metal areas of the bed or
other conductive items.
• Always observe the device and patient to ensure safe operation of the device.
• If you notice any abnormalities in the device or the patient, stop the device or take other
appropriate measures to ensure the safety of the patient.
• Do not allow the patient to come in contact with the device.
• Do not block the vents.
This may result in overheating or a fire hazard.
• Do not drop the device or subject it to strong impact or vibration.
This may result in electric shock or a fire hazard. Contact your local Fukuda Denshi service
representative if this device is dropped or damaged.
CAUTION