Fukuda VaSera VS-2000 Series Скачать руководство пользователя страница 156

Страница: 156 / 234

9-6

Chapter 9 File Transfers

Auto Save

Examination data is automatically saved to a specified media after each examination is finished.

Configure the following items in the Settings.

• Set [File] - [General] - [Auto Save] to "Yes".

• Specify the desired media in [File] - [General] - [Save Media].

If [Auto Save] is set to "Each Exam. Mode", the [Auto Save] settings need to be configured for each examination setting.

If auto saving fails, a check message is displayed.

[Retry]:

Tries saving the data to the media again.

[Cancel]:

Does not save the data to the media. If there is another

storage media, the device saves the data to the other

media.

The settings can be configured to display the save error

message without needing to press a button to confirm it.

Saving Manually (Simple Operation)

Manually save examination data to a specified media after each examination is finished.

Conduct the examination.

Insert the storage media into this
device.

If the media is not formatted, format it first.
(Refer to "Initialization" (P9-4).)

Touch [Save] after the examination is
finished.

The "Storage Media" window is displayed.

Touch the media to save the data.

The data is recorded to the media corresponding to
the button that was touched.

When saving is complete, touch [Back]
in the "Storage Media" window.

The screen returns to the result display.

Saving Manually (File Utility Operation)

Desired data items recorded to the memory of the device can be saved to the media. The storage media can also be selected.

Conduct the examination.

Insert the storage media into this
device.

If the media is not formatted, format it first. (Refer to
"Initialization" (P9-4).)

Содержание VaSera VS-2000 Series











































































































































































































































Результаты поиска

Содержание VaSera VS-2000 Series

Отзывы:

Бренды по названию

Популярные бренды

Fukuda VaSera VS-2000 Series, Руководство по эксплуатации

Результаты поиска

Содержание VaSera VS-2000 Series

Отзывы:

Бренды по названию

Популярные бренды