Fujitsu SPARC Enterprise T5120, Примечания к продукту

Страница: 5 / 150

Contents v
Temporary PCIe Link Failure During Boot Causes a Fatal Error Later (CR
6553515) 25
Ierrs
Are Generated When 100Mb/Full With Forced Speed/Duplex Is Set in
e1000g.conf
(CR 6555486) 26
Firmware, ILOM, POST, and SP Issues 27
Problem When the PCIe Link Fails to Train as x8 (CR 6556505) 38
▼
To Identify the Problem 38
▼ To Correct the Problem 38
Communication Channel Between the Primary Domain and the Service
Processor (SP) Might Hang (CR 6583567) 39
▼ To Recover From a Domain Crash 40
Resetting the SP Produces Extraneous Warning Messages (CR 6585292) 40
Error Messages from the Ultra320 SCSI Card 41
Erroneous Power Supply Faults (CR 6614432) 41
A Built-In Fan May be Erroneously Detected as a Failure (CR 6636098) 42
After a Host Power-On Instruction is Executed from ILOM, the POST May Not
Start, and Processing May Not Go to OS Boot Processing or the
ok
Prompt
(CR 6752910) 43
For DC Input Power Models, /PS0/AC_POK Is Displayed (CR 6815369) 44
According to the IPMI PET Warning and SNMP Trap Warning Settings in the
Warning Rule Settings, Warning Message Creation may not be Possible
Depending on the Event Type (CR 6746677)
45
In the Logical Domains Environment, After the Host Reset Operation, Host
May Be Reset Again (CR 6836426) 46
The ILOM Network Configuration Cannot Be Set
(CR 6835854, 6779753) 47
An Error is Registered with the
showfaults
Command When Running
POST, But POST Ends Normally (CR 11210193) 48
The
ok
Prompt is Not Displayed After POST Ends (CR 11215994) 49
After the Power Cord Removal/Insert, an Error Message May Appear during
the POST 49
Solaris OS Issues 52