Appendix A
Fixed Issues
135
6592934
In the unlikely event that POST times out before
completing its test cycle, the firmware issues the
following message to the console:
ERROR: POST timed out. Not all
system components tested.
The system continues to boot, but in a degraded
state. During the boot process the following
error messages are displayed:
WARNING: Unable to connect to Domain
Service providers
WARNING: Unable to get LDOM Variable
Updates
WARNING: Unable to update LDOM Variable
Any programs or services that depend on an
LDC channel run in a degraded state, or not at
all. Some programs that require LDC to function
are
ldmd
,
fmd
, and
eeprom
.
Note - Fixed in System Firmware 7.1.0.g or
later.
If the error is observed on the console during
boot, power cycle the system, and ensure that
POST runs to completion.
You can also boot without running POST.
You can also update the System Firmware to the
latest version to avoid encountering this issue in
the future.
6593132
Changes to OpenBoot PROM variables with
non-default LDoms configuration do not persist.
If an LDoms variable is set to a non-default
value when an LDoms configuration is saved to
the service processor, and then later changed
back to its default value, the change to its
default value will not persist after a power cycle.
Note - Fixed in System Firmware 7.0.9 or later.
Save the SP configuration after changing an
LDoms variable. Example:
# ldm remove-spconfig my-new-config
# ldm add-spconfig my-new-config
You can also update the System Firmware to the
latest version to avoid encountering this issue in
the future.
6594395
The
ldm set-variable
command allows you
to set an LDoms variable to any arbitrary string.
If an LDoms variable is set to a value that is not
valid, the OpenBoot firmware issues a warning
message during boot with a list of correct values,
but without giving the name of the variable in
question.
Note - Fixed in System Firmware 7.1.0.g or
later.
For more information, refer to the
Logical
Domains (LDoms) 1.0.1 Release Notes
.
You can also update the System Firmware to the
latest version to avoid encountering this issue in
the future.
TABLE A-5
Fixed LDoms Related Issues
(Continued)
CR
Description
Workaround
Содержание SPARC Enterprise T5120
