Fujitsu SPARC Enterprise T5120, Примечания к продукту

Страница: 54 / 150

42 SPARC Enterprise T5120 and T5220 Servers Product Notes • April 2010
Workaround: Make sure that both server power supplies are operating. When both
power supplies are operating, the server will remain powered on during and after
erroneous faults.
A Built-In Fan May be Erroneously Detected as a
Failure (CR 6636098)
If a built-in fan is erroneously detected as a failure and reported as such to the
Enhanced Support Facility software or Server System Manager software, the
following message is displayed:
Message Example of Enhanced Support Facility:
Message Example of Server System Manager:
However, entering one of the ILOM status confirmation commands (such as the
showenvironment
command) will display the status of the system correctly.
When the actual faulty in a built-in fan is detected, the following sample message is
displayed.
Otherwise a built-in fan is erroneously detected as a failure and the message below
is not displayed.
Workaround: Since these messages do not have an effect on your system behavior,
ignore these messages. For the Enhanced Support Facility, this problem is also
resolved by applying the Enhanced Support Facility Patch 914604-04. For Server
System Manager, no workaround is available.
FJSVmadm:A:FANBD0/FM0/F0/TACH:FJSVmadm:Detected failure on the fan
------------------
(location of a built-in fan. Results may vary.)
SSMAPL:A::FJSVapplg::status was changed. (component:"FANBD0/FM0" from "normal"
to "fatal") ----------
(location of a built-in fan. Results may vary.)
sc>
showfaults
Last POST Run: Fri May 16 14:27:39 2008
Post Status: Passed all devices
ID FRU Fault
1 /SYS/FANBD0/FM0 SP detected fault: TACH at /SYS/FANBD0/FM0/F0 has
exceeded low non-recoverable threshold.