Fujitsu SPARC Enterprise T5120, Примечания к продукту

Страница: 39 / 150

Chapter 3 Known Issues 27
Firmware, ILOM, POST, and SP Issues
TABLE 3-3 lists the late-breaking issues for the firmware, ILOM (including ALOM
compatibility CLI), POST, and service processor (SP). Additional information for
some of the issues is provided following the table.
TABLE 3-3
Firmware, ILOM, POST, and SP Issues
CR Description Workaround
6237994 Registration with DMI could fail with an
err=
831
message.
Disable DMI service at the startup. For example:
% mv /etc/rc3.d/S77dmi
/etc/rc3.d/_S77dmi
6510082 For users familiar with ALOM CMT and using
the ALOM CMT compatibility CLI, the help for
the
consolehistory
command displays both a
boot and a run option. Both options result in the
same output because ILOM makes no distinction
between the run and boot buffers.
6556505 The PCIe link might fail to train as x8.
This problem might occur during a power on or
reset sequence where the I/O bridge (PCIe root
complex) of the UltraSPARC T2 CPU does not
properly train the PCIe interface. For workaround procedures, see “Problem
When the PCIe Link Fails to Train as x8 (CR
6556505)” on page 38
.
6568750 Scripts that log into the SP might timeout after
60 seconds.
If this error occurs, the following error message
is displayed:
Logging out after 60 seconds.
Note - This error is not seen during normal
login, only when logging in with a script.
If you use scripts to log into the SP, be aware of
this issue.
6573354 The method for clearing POST results (displayed
with the
showfaults
command) has changed.
After POST runs,
showfaults
displays the
status. The only way to clear the status is to
enter the
setdefaults
command. For users
familiar with ALOM CMT, the previous way to
clear the status was to enter the
resetsc
command.
To clear POST results, use the ALOM CMT
compatibility
setdefaults
command.
6583567 A communication channel between the primary
domain and the service processor (SP) could
hang and disable communication over the
channel. See “Communication Channel Between the
Primary Domain and the Service Processor (SP)
Might Hang (CR 6583567)” on page 39
.