Fujitsu SPARC Enterprise T5120, Примечания к продукту, Страница: 43 / 150

Chapter 3 Known Issues 31
6760139 ILOM firmware and OpenBoot PROM (OBP)
setting information may not be inherited during
motherboard replacement. If an ILOM firmware initialization has been
performed or any of the firmware settings have
been changed, follow the procedure below to
save the latest ILOM firmware setting
information. After replacing the motherboard,
set the saved setting information again.
(Procedure for saving ILOM firmware setting
information)
1)
Log in to ILOM, execute the following
commands, and save the displayed results:
-> show /SP -level all -o table
-> show /SYS -o table
-> s
how /HOST -level all -o table
2) Log in to the ALOM CMT compatibility
shell, execute the following command, and
save the displayed results:
sc> showsc
6762635 One of the following messages may be output
while a POST (self-diagnostics test) is in
progress, and POST processing may not be
completed.
Also, a transition to OpenBoot PROM (OBP)
may occur.
Message examples:
Fault Sensor VMEML_POK at /SYS/MB
deasserted
Fault Sensor VCORE_POK at /SYS/MB
deasserted
Fault Sensor VMEMR_POK at /SYS/MB
deasserted
(Recovery procedure)
Disconnect and then reconnect the power cable.
6761778 The following error message may be displayed:
Message example:
picld[154]: [ID 276222 daemon.error]
PICL snmpplugin: sunPlatSensorClass 0
unsupported (row=388)
Ignore this message.
TABLE 3-3
Firmware, ILOM, POST, and SP Issues (Continued)
CR Description Workaround