Fujitsu SPARC Enterprise T5120, Примечания к продукту

Страница: 143 / 150

Appendix A Fixed Issues 131
CODE EXAMPLE A-1
Procedure for Recovering a Boot Drive”s “drive type”
8. Use the
fmthard
command and stored information to complete the recovery.
root@ # /tmp/fmthard -s /tmp/vtoc /dev/rdsk/c0t0d0s0 <=== raw boot device
used to capture vtoc.
fmthard: New volume table of contents now in place.
root@ #
9. Verify the success of the recovery.
root@ # format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@0/pci@0/pci@2/scsi@0/sd@0,0
Specify disk (enter its number): 0
selecting c0t0d0
[disk formatted]
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name The jumpstart install process
!<cmd> - execute <cmd>, then return
quit
format> partition
PARTITION MENU:
0 - change
‘
0
’
partition
1 - change
‘
1
’
partition
2 - change
‘
2
’
partition
3 - change
‘
3
’
partition
4 - change
‘
4
’
partition