Fujitsu SPARC Enterprise T5120, Примечания к продукту

Страница: 65 / 150

Chapter 3 Known Issues 53
6373437
(6588499) A Solaris OS shutdown might hang and result in
fewer system services.
Rarely, a shutdown performed immediately after
the Solaris OS boots might cause the system to
hang because some system services are
attempting to stop while others are still in the
process of starting. The hang occurs with a
message similar to the following:
svc.startd: The system is coming down.
Please wait
svc.startd: 74 system services are now
being stopped
Reboot the system by dropping to the service
processor (SP). Then power cycle the host
system using one of the following methods:
• From the ILOM CLI:
->
stop /SYS
-> start /SYS
• From the ALOM CMT compatibility CLI:
sc> poweroff
sc> poweron
sc> powercycle
6607315 The login prompt resets five seconds after the
Solaris OS boots.
This only occurs when using a local keyboard as
the input device (
input-device=keyboard
).
This issue does not occur with the virtual-
console.
Use the virtual console as the input device.
n/a
T
he output of the
raidctl -h
command and
the
raidctl
man page display some
unsupported features.
The SPARC Enterprise T5120 and T5220 servers
currently only support RAID 0 and RAID 1 for
the o- board SAS disk controller. The
raidctl
utility can be used to create and delete RAID 0 &
RAID 1 volumes. Refer to the
SPARC Enterprise
T5120 and T5220 Servers Administration Guide for
supported RAID information.
6617544 The
prtdiag
command doesn't display the fjgi
information of Fujitsu-manufactured card
None.
6617549 In times such as PSU failure, OS outputs the
message; however, the last one character is not
displayed. None.
6722640 Messages similar to the following might be
displayed during boot.You might not be able to
get some sensor information when using SNMP.
picld[xxx]: PICL snmpplugin:
sunPlatSensorClass 0 unsupported
This problem has no effect on your server when
not using SNMP.
6718841 Sun Explorer may fail to collect the ILOM data
(Tx000). If failed, it may take more than 30
minutes to return an error. You can collect the ILOM data (Tx000) in
another way.
For details, see
“Sun Explorer May Fail to
Collect the ILOM Data (Tx000) (CR 6718841)” on
page 55
.
TABLE 3-4
Solaris OS Issues (Continued)
CR Description Workaround