Fujitsu SPARC Enterprise T5120, Примечания к продукту

Страница: 130 / 150

118 SPARC Enterprise T5120 and T5220 Servers Product Notes • April 2010
6586624 The Solaris
prtdiag
and
prtpicl
commands
might not display complete information, as
follows:
• If the
prtdiag -v
option is specified, the
firmware version and the chassis serial
number might not be displayed.
• The
prtpicl
command will not always
display the physical-platform section.
Note - Fixed in System Firmware 7.0.9 or later.
Use alternative methods to obtain the
information you need as described in
“Information Missing From
prtpicl
and
prtdiag
Commands (CR 6586624)” on
page 121 .
You can also update the System Firmware to the
latest version to avoid encountering this issue.
6586847
Th
e Solaris
prtdiag
command without the
-v
option does not show failures in the output.
Note - Fixed in the Solaris 10 5/08 OS (and
later) and in the Solaris 10 8/07 OS with patch
ID 127127-11 or later installed.
Use the
-v
option when running the
prtdiag
command.
You can also upgrade the OS or install the patch
to avoid encountering this issue.
6587389
The
Solaris
prtdiag -v
command might
display information with missing spaces,
making the output difficult to read.
Note - Fixed in the Solaris 10 5/08 OS (and
later) and in the Solaris 10 8/07 OS with patch
ID 127127-11 or later installed.
Use the
showenvironment
command from the
ALOM CMT compatibility CLI as follows:
sc>
showenvironment
For more details, see “The
prtdiag -v
Command Has Formatting Issues (CR 6587389)”
on page 123
.
You can also upgrade the OS or install the patch
to avoid encountering this issue.
6588452 Booting the Solaris OS from an external USB
DVD-ROM drive could cause a panic and fail to
boot.
For more information, see
“Booting the Solaris
OS From an External USB DVD-ROM Drive
Could Cause a Panic (CR 6588452)” on page 122
.
Note - Fixed in the Solaris 10 5/08 OS (and
later) and in the Solaris 10 8/07 OS with patch
ID 127127-11 or later installed.
Use the built-in DVD drive, or use a drive whose
subclass is not 2, 3, or 4.
You can also upgrade the OS or install the patch
to avoid encountering this issue.
6588550 The Solaris
prtdiag -v
command is slow to
respond on the SPARC Enterprise T5120 servers.
The command might take as long as 5 minutes to
display output and therefore appears to hang.
Note - Fixed in Solaris patch ID 139502-01 or
later.
Be aware of the delay, and wait for the output.
Do not perform a Control-C.
TABLE A-4
Fixed Solaris OS Issues (Continued)
CR Description Workaround