Fujitsu SPARC Enterprise T5120, Примечания к продукту

Страница: 64 / 150

52 SPARC Enterprise T5120 and T5220 Servers Product Notes • April 2010
Solaris OS Issues
TABLE 3-4 lists the late-breaking issues related to the running the Solaris OS on the
SPARC Enterprise T5120 and T5220 servers. Additional information for some of the
issues is provided following the table.
Note – Additionally, more general Solaris OS late-breaking issues are described in
the Solaris 10 Release Notes.
TABLE 3-4
Solaris OS Issues
CR Description Workaround
6519290 Large amounts of I/O on swap devices might
cause the system to appear hangup by
overwelling the I/O system. The amount of I/O required may be generated
through a number of ways: memory shortage,
heavy use of /tmp etc.
Set the following to
/etc/system
and then
reboot the Solaris OS.
set maxfastscan=0x2000
6564180 The Solaris OS
locator
command does not
work on this server.
Instead, use either the ILOM or ALOM CMT
compatibility
locator
command as follows:
• From the ILOM CLI:
-> show /SYS/LOCATE/
-> show /SYS/LOCATE/ value=off
-> show /SYS/LOCATE/ value=on
• From the ALOM CMT compatibility CLI:
sc>
showlocator
sc> setlocator on
sc> setlocator off
6587380 The Solaris
prtdiag -v
command displays non-
voltage information in the voltage indicator
section.
Be aware that the voltage and nonvoltage
information (such as
PS0/TEMP_FAULT
) is
accurate and represents the current condition of
the components.