Fujitsu SPARC Enterprise T5120, Примечания к продукту

Страница: 55 / 150

Chapter 3 Known Issues 43
After a Host Power-On Instruction is Executed
from ILOM, the POST May Not Start, and
Processing May Not Go to OS Boot Processing or
the
ok
Prompt (CR 6752910)
After a host power-on instruction is executed from ILOM, the POST (self-diagnostics
test) may not start, and processing may not go to OS boot processing or the
ok
Prompt for OpenBoot PROM (OBP).
[ILOM command interface operation example]
[ALOM CMT compatibility shell operation example]
Nothing is displayed on the OS console. Entering the escape character "
#
" restores
the ILOM prompt. The result of the Domain Status may vary. No power-on log item
has been recorded in the event log.
showplatform
command and
showlogs
command domain status reference
example:
-> start /SYS
-> start /SP/console
Are you sure you want to start /SP/console (y/n)? y
Serial console started. To stop, type #.
sc> poweron
sc> console
Enter #. to return to ALOM.
sc>
showplatform
SUNW,SPARC-Enterprise-T5120
Domain Status
------ ------
S0 Powered off * Domain Status : "Powered on", "Powered off", "OpenBoot
initializing", "Unknown" etc.
sc>
sc> showlogs -p p
Log entries since Sep 29 12:45:39
----------------------------------
Sep 29 12:45:39: Chassis |major : "Host has been powered on"
Sep 29 12:49:28: Chassis |major : "Host is running"
Sep 29 12:49:43: Chassis |critical: "Host has been powered off"