Fujitsu ScanSnap, Руководство по продвинутой эксплуатации

Страница: 135 / 211

Filling in Fingers Captured in a Scanned Image (When a
Document Is Scanned)
Fingers that are captured when a document is scanned can be filled in.
ATTENTION
l Do not hold the corners of the document when you scan.
If you do so, the shape of the image may not be recognized correctly.
l To fill in fingers captured in the scanned image, the fingers need to be detected.
If a document is scanned in the following ways, captured fingers may not be detected correctly.
-
When two or more fingers that are used to hold down a document to be scanned are touching
each other (Figure 1)
- When you hold down a document to be scanned with manicured fingers or fingers with artificial
nails (Figure 2)
- When you hold down a document to be scanned with your fingers bent (Figure 3)
- When fingers that are used to hold down a document to be scanned are captured 1 cm (0.39
in.) or more (Figure 4)
- When there is text or an image within 5 mm (0.2 in.) around the fingers that are used to hold
down a document to be scanned (Figure 5)
- When a document that has a background color other than white is scanned (Figure 6)
- When a document is scanned after [Gray], [B&W], or [Color high compression] is selected from
the [Color mode] drop-down list in the [Scanning] tab of the ScanSnap setup window
1 cm (0.39 in.) 5 mm (0.2 in.)
1 2 3 4 5 6
or More or Less
HINT
l Up to five fingers on each side (top/bottom/right/left) of the document can be filled in.
l To prevent image deterioration, select and fill in as many fingers as possible in one go.
1.
On the window that appears after a document is scanned, select [Crop and
save flat document images as-is] and click the [Check/Correct] button.
Scanning a Document
135