PART Ⅲ INSPECTION AND SERVICE TROUBLE SHOOTING
Blower belt is dragged.
Blower brake is worn away.
Auger and blower
do not stop rotating
although work
clutch lever is set
at "Off".
Contact your dealer.
The machine does
not throw snow
although work
clutch lever is set
at "On".
Blower belt is loosened.
Contact your dealer.
Chute and blower are clogged with snow.
Remove snow.
→P.40
Foreign object is caught in auger and blower.
Remove foreign object.
The tension of travel belt is too much.
Contact your dealer.
Auger and blower
do not rotate
although work
clutch lever is set
at "On".
Operation procedure is incorrect.
Follow correct procedures.
→P.35 to 37
Blower belt is loosened.
Contact your dealer.
The machine stops
traveling.
Change lever returns.
Contact your dealer.
Chute does not
rotate.
Contact your dealer.
Fuse has blown.
Wire has come off.
Shear bolt is broken.
Exchange shear bolt.
→P.54
The machine does
not stop traveling
although travel
clutch lever is set
at "Off".
Chute deflector
does not look up or
down.
Contact your dealer.
Fuse has blown.
Wire has come off.
Light cannot be
turned on.
Light switch is set at "Off".
Set light switch at "On".
Fuse has blown.
Bulb is out.
Wire has come off.
Contact your dealer.
Fuse has blown.
Auger housing does
not raise or lower.
Wire has come off.
Operate auger housing after hydraulic cylinder has
cooled down.
Contact your dealer.
PROBLEM
CAUSE
SERVICE
Auger housing does
not tilt to right or
left.
(MRA-
Ai/MRA/MR)
Hydraulic cylinder is overheating.
Operate auger housing after hydraulic cylinder has
cooled down.
Fuse has blown.
Contact your dealer.
Wire has come off.
Hydraulic cylinder is overheating.
- 59 -
