FUJII 913ML2-S Скачать руководство пользователя | Manualshive

Страница: 12 / 70

background image

PART Ⅰ　FOR SAFE WORK

WARNING Be sure to fix covers to the machine.

Any covers which are detached for inspections and
service must be correctly fixed to their original positions.

[Results of failure to comply]
Operator may be caught in the machine
causing injury.

CAUTION Carry out inspection and service after heating parts
have sufficiently cooled down.

Carry out inspection and service only after heating parts
such as muffler and engine have sufficiently cooled
down.

[Results of failure to comply]
Failure to comply may result in burns.

DANGER　Be sure to stop the engine when inspecting, servicing, cleaning or
refueling the machine.

Be sure to stop the engine when inspecting, servicing,
cleaning or refueling the machine. Set travel and work
clutch at "Off", and make sure that each part has stopped
its operation completely. Carry out inspection only after

heating parts have cooled down.

[Results of failure to comply]
Failure to comply may result in fire and serious injury such as getting caught in the
machine.

● PRECAUTIONS FOR TRANSPORT

WARNING When transporting the machine by public road, transport it by truck.

When transporting the machine by public road, load it
on a truck, and transport it by truck.

[Results of failure to comply]
Failure to comply may result in traffic accident and injury.

WARNING Use gangplanks of sufficient length, strength, and width when
loading and unloading the machine on and from a truck.

Use sturdy and non-slip gangplanks that meet
the standard when loading and unloading the
machine on and from a truck.

[Results of failure to comply]
Failure to comply may result in broken gangplanks,
machine tumbling or falling over, and injury.

Standard of gangplanks
Strength: Enough to resist
              the weight of the machine
Width     : More than
               1.2 x crawler width
Length   : More than
                 4 x carrier height
              With non-slip surface
              and hooks

- 7 -

«
...
10
11
12
13
14
...
»

Содержание 913ML2-S







































































Отзывы:

Нет отзывов

Похожие инструкции для 913ML2-S

Бренд: STOLZENBERG Страницы: 9

Бренд: Yard Machines Страницы: 30

Бренд: Gardenline Страницы: 33

ELECTRIC SNOW THROWERS

Бренд: MTD Страницы: 13

Бренд: MTD Страницы: 28

Бренд: Cub Cadet Страницы: 28

Бренд: Texas Equipment Страницы: 12

Бренд: Toro Страницы: 32

SCL K-MS MOR Series

Бренд: F.P.Z. Страницы: 38

Бренд: FIORENTINI Страницы: 15

Бренд: Power smart Страницы: 14

Бренд: Haaga Страницы: 19

Бренд: Warn Страницы: 2

Бренд: Warn Страницы: 12

Бренд: Tennant Страницы: 48

Бренд: Parkside Страницы: 88

Flex-Force Power System 31853

Бренд: Toro Страницы: 224

Vrisimo BL Series

Бренд: Valley Tool Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды