PART Ⅲ INSPECTION AND SERVICE
▼
HANDLING OF BATTERY
●
When temperature is lower, the performance of battery goes down. Pay attention to storage
condition especially in winter.
●
Electricity is discharged when the battery is not used, too. Recharge on a regular basis.
●
When storing battery for a long time, detach it from the machine and store it in a dry and
shady place with temperature from -5
℃
to 15
℃
.
When store battery attached to the machine unwillingly, be sure to disconnect battery
code from negative terminal (-).
●
When exchanging battery, be sure to use specified battery.
●
When recharging battery, be sure to detach it from the machine.
Otherwise, electrical part and wire may be damaged.
●
Avoid rapid recharging of battery because it shortens the life of battery.
●
When recharging, check positive lead (+) and negative lead (-), and
connect to battery charger correctly.
●
When attaching battery to the machine, connect positive side (+) of
battery code first. Then, connect negative side (-). Be careful not to
contact with surrounding parts.
■INSPECTION OF WIRE (HARNESS)
●
If wires come off or terminals are loosened, it causes malfunction or poor connection.
Make sure terminals which are fixed by bolts are not loosened and coupler does not come
off.
●
Make sure wires do not contact with parts below.
・
Sharp corner such as metal sheet, head of bolt and nut
・
Moving parts such as belt, pulley, speed change rod.
・
Heating parts such as muffler
●
When malfunction is found in inspection, ask your dealer for inspection
and service.
12V - 27Ah （5 hours rate)
Summer ・・・・・ Once per month Winter ・・・・・ Once per two months
Specification
Voltage － Capacity
40B - 19R
IMPORTANT
IMPORTANT
- 56 -
