PART Ⅲ INSPECTION AND SERVICE
2．INSPECTION AND EXCHANGE OF OIL
●
For inspection and service, place the machine in a flat and large space
without obstacle. Stop the engine and make sure each part has stopped its
operation and heating part has cooled down before inspection and service.
●
During inspection and service, never smoke or keep anything which may
cause fire near the machine. Otherwise, the fuel ignites and fire may occur.
●
Do not supply fuel or oil in excess of the prescribed amount. Wipe away
any spilled fuel or oil completely.
●
If covers are detached, be sure to fix them to their original position.
●
When inspecting or exchanging oil, keep the machine in horizontal position.
●
When exchanging oil, use receptacle for oil. Do not spill the oil around the machine.
If the oil spilled, wipe it off completely.
●
Be sure to dispose of waste oil in a place with waste oil disposal facilities.
■INSPECTION AND EXCHANGE OF ENGINE OIL
▼
Inspection → Carry out before every work
・
Refer to page 26 of this manual.
▼
Exchange → Refer to "Engine manual".
(1)
Detach filler cap and drain plug.
Drain the oil.
(2)
Attach drain plug and put prescribed oil
through filler port.
(3)
Check the amount of oil with oil gauge.
(4)
Attach filler cap.
●
Refer to "Engine manual" for details of time and method of exchange.
■INSPECTION OF ＨＳＴ OIL TANK
▼
Inspection → Carry out before every work
・
Refer to page 27 of this manual.
02-8619-11
Engine oil for gasoline
10W-30, over SE grade
（－15℃ to 15℃）
Oil to
use
Oil to use
Engine oil for diesel
Over CD grade, 10W-30
In case using the machine out of the
temperature range above, refer to
"Engine manual".
Amount
1.0 L
SUPPLEMENT
WARNING
CAUTION
DANGER
DANGER
Regular range
Upper limit
Lower limit
- 52 -
