PART Ⅲ INSPECTION AND SERVICE
●
For inspection and service, place the machine in a flat and large space
without obstacle. Stop the engine and make sure each part has stopped
its operation and heating part has cooled down before inspection and service.
●
During inspection and service, never smoke or keep anything which may cause
fire near the machine. Otherwise, the fuel ignites and fire may occur.
●
Do not supply fuel or oil in excess of the prescribed amount. Wipe away
any spilled fuel or oil completely.
●
If covers are detached, be sure to fix them to their original position.
1．LIST OF INSPECTION AND SERVICE
●
Refer to "Regular service list" and carry out inspection and service so that the machine can
demonstrate its performance correctly and work can be done safely.
●
The interval time of service shown in "Regular service list" is a standard. Actual interval time
may differ according to work condition and service situation. Carry out service when it is
necessary.
●
If you do not have skill and experience, do not attempt to service the machine.
●
Refer to "Inspection and preparation before work " (p.25) and carry
out daily inspection.
■WASTE DISPOSAL
●
Inappropriate disposal of waste oil and plastic results in environmental pollution.
●
When draining oil from the machine, use receptacle.
Never drain oil to the ground or dump it into river and lake.
●
When disposing of waste oil, fuel, coolant, solvent, filter, battery, or other toxic substance,
contact your dealer or request disposal to a company specializing in the disposal of industrial
waste.
●
Be sure to comply with the regulation about disposal of used material.
INSPECTION AND SERVICE
IMPORTANT
WARNING
CAUTION
DANGER
DANGER
- 49 -
