FUJII 913ML2-S Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 70

background image

PART Ⅰ　FOR SAFE WORK

WARNING Work and travel near fire are prohibited.

Do not travel nor remove snow near fire.

[Results of failure to comply]
Failure to comply may result in fire due to ignition
of fuel or oil.

WARNING　Pay attention to the shoulder of road while moving the machine.

If there are ditches or slope around the road, pay
attention to the shoulder.

[Results of failure to comply]
Failure to comply may result in the machine falling
over.

WARNING　Be sure to disengage work clutch and raise auger housing when
moving the machine.

Be sure to set work clutch at "Off"

and raise auger housing when transporting the
machine.

[Results of failure to comply]
Failure to comply may result in getting caught in
the rotating parts or hitting with foreign objects
causing unexpected accident.

WARNING　Do not activate work clutch except for snow removal work.

Do not set work clutch at "On" except for
snow removal work or inspection.
If auger rotates, it is dangerous.

[Results of failure to comply]
Failure to comply may result in getting caught
in auger causing injury.

- 13 -

«
...
16
17
18
19
20
...
»

Содержание 913ML2-S







































































Отзывы:

Нет отзывов

Похожие инструкции для 913ML2-S

Бренд: Vax Страницы: 16

Бренд: Powersmart Страницы: 17

Бренд: Lavorwash Страницы: 96

Бренд: Murray Страницы: 206

Бренд: Honda Power Products Страницы: 282

Бренд: AEG Страницы: 24

Бренд: AEG Страницы: 64

Бренд: AEG Страницы: 65

Бренд: Oleo-Mac Страницы: 32

Бренд: Texas Equipment Страницы: 12

Бренд: Schmidt Страницы: 180

Бренд: GreenWorks Pro Страницы: 44

Бренд: GreenWorks Pro Страницы: 60

Бренд: Prestige Страницы: 4

Бренд: Power Fist Страницы: 48

Бренд: Power smart Страницы: 96

Бренд: Ventrac Страницы: 23

Бренд: Trebs Страницы: 19

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды