PART Ⅰ FOR SAFE WORK
●
SAFETY LABEL
■
SAFETY LABEL
●
Safety labels are attached on the machine for safe work.
Check them carefully and be sure to follow the instructions.
●
In case mud is on the labels, wipe it completely so that the labels are always visible.
●
In case the labels are damaged, lost, or difficult to understand, replace them with
new labels.
●
When exchanging parts to which safety labels are attached, contact your dealer
and order the labels also.
●
When ordering safety labels, refer to "Location and meaning" below, and tell your
dealer the code and quantity of necessary label.
●
If high pressured water is sprayed over the labels, they may fall off.
Do not spray the labels with high pressured water.
■
LOCATION AND MEANING
※
Safety labels on the engine
are explained in "Engine manual".
Read it well.
A. WARNING! Pay attention to safety. Do not cause short-circuit and spark with tools. Recharge the
battery in a well-ventilated place. Refer to the manual for use of booster cable.
B. WARNING! Read the operation manual carefully.
C. DANGER! When handling battery, do not keep fire such as short-circuit, spark, and cigarette near
the machine.
D. DANGER! When handling battery, be sure to wear safety glasses and protective gear.
E. DANGER! The battery may explode if it is handled inappropriately. Do not use when fluid level is under
the lower limit. Using the battery with fluid lever under the lower limit may cause explosion.
F. DANGER! Eyesight may be lost or a burn may occur because of battery fluid. If battery fluid comes into
contact, flush out with a large quantity of water immediately. If it comes into eye, see a doctor.
8600-13-75-0
MARK/CAUTION D/ISO
SH1-02
A B C
D E F
- 15 -
