PART Ⅱ OPERATION BEFORE USING THE MACHINE
3．NAME AND WORK
●
The No. shown below correspond to the numbers listed in "NAME OF PARTS" (p.19 - 20).
No.
Operate when starting, running, and stopping the engine.
"Stop" - Stop the engine.
"Run" - Run the engine.
"Start" - Start the engine by starter motor.
●
Take your hand off the engine key immediately when
the engine starts at "Start" position.
Operate when starting the engine.
If the knob is pulled, compressed fuel is supplied to the engine and
makes the starting easy.
Operate when controlling engine rotation.
"
: high speed" (move the lever to upper side)
－
high revolution
"
: low speed" (move the lever to lower side)
－
low revolution
Operate when switching travel speed range.
"High speed" range (set the lever to "Travel" side from
"N.Neutral") - suitable range for high speed movement.
"Low speed" range (set the lever to "Work" side from
"N.Neutral") - suitable range for work and low speed
movement.
"N.Neutral" is the middle point of "High" and "Low".
When change lever is at this position, change gear is
not engaged. The machine does not travel even though
travel clutch lever is at "On".
Operate when switching forward/backward and controlling travel speed.
"Forward" (set the lever to "Forward " side from
"Neutral point") - the machine goes forward.
"Backward" (set the lever to "Backward" side from
"Neutral point") - the machine goes backward.
"N.Neutral" is the middle point of "High" and "Low".
The machine does not travel even though the
travel clutch lever is at "On".
Travel speed increases as the lever is tilted from "Neutral point" and
the speed decreases as the lever is returned.
●
Operate the change lever slowly.
●
When travel clutch lever is set at "On", change
lever can be fixed at an optional position.
When travel clutch lever is set at "Off", change
lever returns to "Neutral point".
WORK
②
Choke knob
④
Change lever
③
Throttle lever
NAME
①
Engine switch
Engine key
Ｎ.Neutral
Neutral point
Stop
Run
Start
IMPORTANT
SUPPLEMENT
IMPORTANT
- 21 -
