FujiFilm ED-580XT, Руководство по эксплуатации

Страница: 65 / 136

897N200877B
4-13
Chapter 4
Prepara
tion and Inspectio
n
4.4 Inspecting and Attaching Accessories
Prior to inspection, make sure that dirt does not adhere to the accessories. If dirt adheres
to the accessories, reprocess them according to the instructions given in the Reprocessing
Manual.
4.4.1 Forceps Valve
<When the lid is open> <When the lid is closed (top view)>
<When the lid is closed (side view)>
Slit Slit
Circular Hole Main Body of Forceps Valve Lid
Main Body of
Forceps Valve
WARNING
• The forceps valve is intended for single use. Discard it after use. If a deteriorated forceps
valve is used, body fluids may leak, causing infection.
• Reprocess the forceps valve before use. Use of an improperly reprocessed forceps valve
can create a risk of infection.
• Make sure to check the forceps valve before use. If the inspection result shows any sign of
abnormality or irregularity, replace the forceps valve with a new one already reprocessed.
Use of an abnormal forceps valve may cause the leakage of body fluid, posing an infection
risk.
• Ensure that the forceps valve is properly attached to the instrument channel inlet. If this
product is used without the forceps valve attached, body fluid may leak and it could be a
source of infection.
<Preparation>
The forceps valve is not reprocessed before shipping from FUJIFILM. Reprocess it according
to the instructions given in the Reprocessing Manual before using it in a procedure.
Reprocessing Manual
<Inspection>
(1) Confirm that the slit and circular hole on the forceps valve are free from abnormalities such as
splits, cracks, deformations or discoloration.
(2) Close the lid and visually check that there is no clearance between the lid and the main body
of the forceps valve.
Forceps Valve Suction Valve Air/Water Valve Distal End Cap
4.4 Inspecting and Attaching Accessories
ED580XT_E2-30_897N200877B.indb 13 2018/09/20 15:50:21